HITACHI Power Tools: Products

hitachi.us

hitachi.com

Global Network

CANADA USA

FRANÇAIS

Products > Metalworking

Metalworking

Grinders

Cut-Off Tools

Nibblers & Shears

Rebar Cutter / Bender

Disc Sanders / Polishers

Grinders

G10SR2 4" Disc Grinder

The G10SR2 4" Disc Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble.

G12S2 4-1/2" Disc Grinder AC/DC

The G12S2 4 1/2" 7 AMP Disc Grinder removes casting fin; finishes various types of steel, bronze, aluminum, and various other metallic materials; grinds welds or sections by means of a cutting torch; and grinds synthetic resins, slate, brick, and marble.

G12SA2 4-1/2" Disc Grinder

The G12SA2 4 1/2" 7.7 AMP Disc Grinder deburs diecast products; finishes iron, bronze, aluminum, and diecast products; finishes welds and torch-cut surfaces; cuts soft steel materials; and grooves and cuts concrete and other stone materials.

G12SA3 4-1/2" Grinder

The G12SA3 features a powerful 8 Amp motor that produces a Max output power of 1,250 Watts to tackle the toughest jobs. With exclusive Reverse Air Flow and Coil Protection technology that significantly increases tool life and durability.

G12SE2 4-1/2" Disc Grinder

The G12SE2 4-1/2" Disc Grinder is compact and powerful. It deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G12SR2K 4-1/2" Disc Grinder

The G12SR2 4 1/2" Disc Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble.

G12SR3 4-1/2" Grinder With 5 Bonus Grinding Wheels

The G12SR3 4 1/2" Angle Grinder removes casting fin, finishes various types of steel, bronze and aluminum materials and castings, grinds welded sections, sections cut by means of an acetylene torch, synthetic resins, slate, brick and marble.

G12SS 4-1/2" Angle Grinder

The G12SS 4-1/2" Angle Grinder is lightweight and compact offering performance and durability. It is perfect for grinding metal and masonry, removing rust and paint, and sanding various surfaces.

G13SB2 5" Disc Grinder, AC

The G13SB2 5" Disc Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

G13SB3 5" Grinder

The G13SB3 features a powerful 8 Amp motor that produces a Max output power of 1,250 Watts to tackle the toughest jobs. With exclusive Reverse Air Flow and Coil Protection technology that significantly increases tool life and durability.

G13SC2 5" Disc Grinder

The G13SC2 5" Disc Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

G13SE2 5" Disc Grinder AC/DC

The G13SE2 5" Disc Grinder removes casting fin, finishes various types of steel, bronze, and aluminum, grinds welded sections or sections cut by means of acetylene torch and cuts concrete, stone, brick and tile.

G18MR 7" Grinder Featuring IDI Technology

The G18MR 7" Grinder is equipped with Hitachi's IDI technology that significantly strengthens the body of the tool. The G18MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G18SCY 7" UVP Low Vibration Angle Grinder

The G18SCY 7" angle grinder features User Vibration Protection technology which reduces vibration by up to 30%, significantly decreasing user fatigue. It is ideal to debur die-cast products, finish iron, bronze and aluminum and weld and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G18SE3 7" Disc Grinder, AC/DC

The G18SE3 deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G18SR 7" Angle Grinder

Introducing the next generation in 7" grinders, the G18SR features a powerful 15 Amp motor that produces a Max output power of 3,300 Watts to tackle the toughest jobs.

G18SS 7" Disc Grinder, AC/DC

G23MR 9" Grinder Featuring IDI Technology

The G23MR 9" Grinder is equipped with Hitachi's IDI technology that significantly strengthens the body of the tool. The G23MR deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G23SC3 9" Disc Grinder, AC/DC

The G23SC3 deburs diecast products and finishes iron, bronze, aluminum, welds and torch cut surfaces. It can also be used to cut soft steel materials as well as grooving and cutting concrete and other stone materials.

G23SCY 9" UVP Low Vibration Angle Grinder

The G23SCY 9" Angle Grinder features User Vibration Protection technology that reduces vibration by up to 30%, significantly decreasing user fatigue. It is ideal to debur die-cast products, finish iron, bronze and aluminum and weld and torch cut surfaces. It can also be used to cut soft steel materials as well as groove and cut concrete and other stone materials.

G23SR 9" Disc Grinder, AC/DC

Hitachi introduces a new compact and lightweight large angle grinder with the new G23SR. Weighing in at under 10 pounds and measuring a full inch shorter than previous models, the G23SR allows for optimal control while still providing needed power, torque and durability. The 15 Amp, 1,700 Watt motor supplies plenty of power with superior dust and heat protection. The armature is dual sealed with varnish and a heat resistant adhesive to protect from wear caused by dust and debris.

GP2 1" Die Grinder

The GP2 1" Die Grinder is used for finishing dies for press working, die casting, molding, thread cutting dies, tools and other small parts, as well as for internal grinding of tools and machine parts.

Cut-Off Tools

CC12Y 12" Portable Cut-Off Saw, AC/DC

The CC12Y 12" Cut-off Saw cuts sheet metal, concrete, cinder blocks, bricks, reinforcing rods, concrete wire mesh, corrugated floor and ceiling forms.

CC14SF 14" Portable Chop Saw

The CC14SF 14" Chop Saw is built to cut cold formed steel, rebar and pipe quickly and efficiently. It is the ideal chop saw for general contractors, construction professionals, manufacturers and steel fabricators who demand a workhorse of a tool at a competitive value.

CD14F 14" Portable Dry Cutting Saw for Metal

The CD14F 14" Dry-Cutting Metal Saw cuts round pipe, square pipe and flat mild steel. Applications include installation of piping and plumbing for electricity, gas and water supplies.

Nibblers & Shears

CE16SA Hand Shear 16 Gauge, Portable

The CE16SA shears steel, stainless steel, alumnium and copper plate, leather and fiberboard.

CN16SA 16 Gauge Sheet Metal Nibbler

The CN16SA Nibbler cuts and pocket cuts steel plate, aluminum plate, copper plate and corrugated and trapezoidal plate with speed and quick and easy changes in cutting direction.

Rebar Cutter / Bender

VB16Y Rebar Cutter/Bender, Grade 60, EVS

Hitachi's VB16Y Portable Rebar Cutter and Bender offers jobsite simplicity, precision, and portability promising to dramatically reduce the cost of on-site rebar installation. Unlike other machines on the market, the VB16Y can both bend and cut rebar and is easily transportable.

Disc Sanders / Polishers

SAT180 7" Disc Sander/Polisher, 2-speed

The SAT180 6.9 AMP 2-speed Disc Sander/Polisher is capable of sanding metallic surfaces, preparatory sanding of metallic and wooden surfaces prior to painting, removal of paint and rust, finishing woodwork and making flush joints of wooden plates, finishing and polishing metallic surfaces such as motor vehicles, refrigerators, elevators, etc., polishing lacquered surfaces on wooden products, and polishing synthetic resin and ebonite products.

SP18VA / SP18VA(H) 7" Disc Sander/Polisher

The SP18VA / SP18VA(H) 11.0 AMP Variable Speed Disc Sander/Polisher is capable of sanding metallic surfaces, preparatory sanding of metallic and wooden surfaces prior to painting, removal of paint and rust, finishing woodwork, making flush joints of wooden plates, finishing and polishing metallic surfaces such as motor vehicles, refrigerators, elevators, etc., polishing lacquered surfaces on wooden products, and polishing synthetic resin and ebonite products.

Find a Retailer

Hitachi Koki Ltd.